Index: trunk/locks/db.lock
===================================================================
--- trunk/locks/db.lock	(revision 23)
+++ trunk/locks/db.lock	(nonexistent)
@@ -1,10 +0,0 @@
-DB lock file, representing locks on the versioned filesystem.
-
-All accessors -- both readers and writers -- of the repository's
-Berkeley DB environment take out shared locks on this file, and
-each accessor removes its lock when done.  If and when the DB
-recovery procedure is run, the recovery code takes out an
-exclusive lock on this file, so we can be sure no one else is
-using the DB during the recovery.
-
-You should never have to edit or remove this file.
Index: trunk/locks/db-logs.lock
===================================================================
--- trunk/locks/db-logs.lock	(revision 23)
+++ trunk/locks/db-logs.lock	(nonexistent)
@@ -1,7 +0,0 @@
-DB logs lock file, representing locks on the versioned filesystem logs.
-
-All log manipulators of the repository's
-Berkeley DB environment take out exclusive locks on this file
-to ensure that only one accessor manupulates the logs at the time.
-
-You should never have to edit or remove this file.
Index: trunk/README.txt
===================================================================
--- trunk/README.txt	(revision 23)
+++ trunk/README.txt	(nonexistent)
@@ -1,9 +0,0 @@
-This is a Subversion repository; use the 'svnadmin' tool to examine
-it.  Do not add, delete, or modify files here unless you know how
-to avoid corrupting the repository.
-
-If the directory "db" contains a Berkeley DB environment,
-you may need to tweak the values in "db/DB_CONFIG" to match the
-requirements of your site.
-
-Visit http://subversion.tigris.org/ for more information.
Index: trunk/hooks/post-commit.tmpl
===================================================================
--- trunk/hooks/post-commit.tmpl	(revision 23)
+++ trunk/hooks/post-commit.tmpl	(nonexistent)
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-# POST-COMMIT HOOK
-#
-# The post-commit hook is invoked after a commit.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-commit' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the number of the revision just committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the commit has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-committed tree.
-#
-# On a Unix system, the normal procedure is to have 'post-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-commit.bat' or 'post-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-
-commit-email.pl "$REPOS" "$REV" commit-watchers@example.org
-log-commit.py --repository "$REPOS" --revision "$REV"
Index: trunk/hooks/pre-unlock.tmpl
===================================================================
--- trunk/hooks/pre-unlock.tmpl	(revision 23)
+++ trunk/hooks/pre-unlock.tmpl	(nonexistent)
@@ -1,60 +0,0 @@
-#!/bin/sh
-
-# PRE-UNLOCK HOOK
-#
-# The pre-unlock hook is invoked before an exclusive lock is
-# destroyed.  Subversion runs this hook by invoking a program 
-# (script, executable, binary, etc.) named 'pre-unlock' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] PATH         (the path in the repository about to be unlocked)
-#   [3] USER         (the user destroying the lock)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the lock is destroyed; but
-# if it exits with failure (non-zero), the unlock action is aborted
-# and STDERR is returned to the client.
-
-# On a Unix system, the normal procedure is to have 'pre-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-unlock.bat' or 'pre-unlock.exe',
-# but the basic idea is the same.
-#
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-PATH="$2"
-USER="$3"
-
-# If a lock is owned by a different person, don't allow it be broken.
-# (Maybe this script could send email to the to the lock owner?)
-
-SVNLOOK=/usr/local/bin/svnlook
-GREP=/bin/grep
-SED=/bin/sed
-
-LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \
-            $GREP '^Owner: ' | $SED 's/Owner: //'`
-
-# If we get no result from svnlook, there's no lock, return success:
-if [ "$LOCK_OWNER" == "" ]; then
-  exit 0
-fi
-# If the person unlocking matches the lock's owner, return success:
-if [ "$LOCK_OWNER" == "$USER" ]; then
-  exit 0
-fi
-
-# Otherwise, we've got an owner mismatch, so return failure:
-echo "Error: $PATH locked by ${LOCK_OWNER}." 1>&2
-exit 1
Index: trunk/hooks/pre-revprop-change.tmpl
===================================================================
--- trunk/hooks/pre-revprop-change.tmpl	(revision 23)
+++ trunk/hooks/pre-revprop-change.tmpl	(nonexistent)
@@ -1,65 +0,0 @@
-#!/bin/sh
-
-# PRE-REVPROP-CHANGE HOOK
-#
-# The pre-revprop-change hook is invoked before a revision property
-# is added, modified or deleted.  Subversion runs this hook by invoking
-# a program (script, executable, binary, etc.) named 'pre-revprop-change'
-# (for which this file is a template), with the following ordered
-# arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REVISION     (the revision being tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property being set on the revision)
-#   [5] ACTION       (the property is being 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the new property value is passed via STDIN.
-#
-# If the hook program exits with success, the propchange happens; but
-# if it exits with failure (non-zero), the propchange doesn't happen.
-# The hook program can use the 'svnlook' utility to examine the 
-# existing value of the revision property.
-#
-# WARNING: unlike other hooks, this hook MUST exist for revision
-# properties to be changed.  If the hook does not exist, Subversion 
-# will behave as if the hook were present, but failed.  The reason
-# for this is that revision properties are UNVERSIONED, meaning that
-# a successful propchange is destructive;  the old value is gone
-# forever.  We recommend the hook back up the old value somewhere.
-#
-# On a Unix system, the normal procedure is to have 'pre-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-revprop-change.bat' or 'pre-revprop-change.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-if [ "$ACTION" = "M" -a "$PROPNAME" = "svn:log" ]; then exit 0; fi
-
-echo "Changing revision properties other than svn:log is prohibited" >&2
-exit 1
Index: trunk/hooks/pre-commit.tmpl
===================================================================
--- trunk/hooks/pre-commit.tmpl	(revision 23)
+++ trunk/hooks/pre-commit.tmpl	(nonexistent)
@@ -1,69 +0,0 @@
-#!/bin/sh
-
-# PRE-COMMIT HOOK
-#
-# The pre-commit hook is invoked before a Subversion txn is
-# committed.  Subversion runs this hook by invoking a program
-# (script, executable, binary, etc.) named 'pre-commit' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] TXN-NAME     (the name of the txn about to be committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the txn is committed; but
-# if it exits with failure (non-zero), the txn is aborted, no commit
-# takes place, and STDERR is returned to the client.   The hook
-# program can use the 'svnlook' utility to help it examine the txn.
-#
-# On a Unix system, the normal procedure is to have 'pre-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-#   ***  NOTE: THE HOOK PROGRAM MUST NOT MODIFY THE TXN, EXCEPT  ***
-#   ***  FOR REVISION PROPERTIES (like svn:log or svn:author).   ***
-#
-#   This is why we recommend using the read-only 'svnlook' utility.
-#   In the future, Subversion may enforce the rule that pre-commit
-#   hooks should not modify the versioned data in txns, or else come
-#   up with a mechanism to make it safe to do so (by informing the
-#   committing client of the changes).  However, right now neither
-#   mechanism is implemented, so hook writers just have to be careful.
-#
-# Note that 'pre-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-commit.bat' or 'pre-commit.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-TXN="$2"
-
-# Make sure that the log message contains some text.
-SVNLOOK=/usr/local/bin/svnlook
-$SVNLOOK log -t "$TXN" "$REPOS" | \
-   grep "[a-zA-Z0-9]" > /dev/null || exit 1
-
-# Check that the author of this commit has the rights to perform
-# the commit on the files and directories being modified.
-commit-access-control.pl "$REPOS" "$TXN" commit-access-control.cfg || exit 1
-
-# All checks passed, so allow the commit.
-exit 0
Index: trunk/hooks/start-commit.tmpl
===================================================================
--- trunk/hooks/start-commit.tmpl	(revision 23)
+++ trunk/hooks/start-commit.tmpl	(nonexistent)
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-# START-COMMIT HOOK
-#
-# The start-commit hook is invoked before a Subversion txn is created
-# in the process of doing a commit.  Subversion runs this hook
-# by invoking a program (script, executable, binary, etc.) named
-# 'start-commit' (for which this file is a template)
-# with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the authenticated user attempting to commit)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the commit continues; but
-# if it exits with failure (non-zero), the commit is stopped before
-# a Subversion txn is created, and STDERR is returned to the client.
-#
-# On a Unix system, the normal procedure is to have 'start-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'start-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'start-commit.bat' or 'start-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-USER="$2"
-
-commit-allower.pl --repository "$REPOS" --user "$USER" || exit 1
-special-auth-check.py --user "$USER" --auth-level 3 || exit 1
-
-# All checks passed, so allow the commit.
-exit 0
Index: trunk/hooks/post-revprop-change.tmpl
===================================================================
--- trunk/hooks/post-revprop-change.tmpl	(revision 23)
+++ trunk/hooks/post-revprop-change.tmpl	(nonexistent)
@@ -1,55 +0,0 @@
-#!/bin/sh
-
-# POST-REVPROP-CHANGE HOOK
-#
-# The post-revprop-change hook is invoked after a revision property
-# has been added, modified or deleted.  Subversion runs this hook by
-# invoking a program (script, executable, binary, etc.) named
-# 'post-revprop-change' (for which this file is a template), with the
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the revision that was tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property that was changed)
-#   [5] ACTION       (the property was 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the old property value is passed via STDIN.
-#
-# Because the propchange has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# new property value.
-#
-# On a Unix system, the normal procedure is to have 'post-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-revprop-change.bat' or 'post-revprop-change.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-propchange-email.pl "$REPOS" "$REV" "$USER" "$PROPNAME" watchers@example.org
Index: trunk/hooks/post-unlock.tmpl
===================================================================
--- trunk/hooks/post-unlock.tmpl	(revision 23)
+++ trunk/hooks/post-unlock.tmpl	(nonexistent)
@@ -1,42 +0,0 @@
-#!/bin/sh
-
-# POST-UNLOCK HOOK
-#
-# The post-unlock hook runs after a path is unlocked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-unlock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who destroyed the lock)
-#
-# The paths that were just unlocked are passed to the hook via STDIN
-# (As of Subversion 1.2, only one path is passed per invocation, but
-# the plan is to pass all locked paths at once in Subversion 1.3 and
-# later).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been destroyed and cannot be undone,
-# the exit code of the hook program is ignored.
-#
-# On a Unix system, the normal procedure is to have 'post-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-unlock.bat' or 'post-unlock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was removed:
-mailer.py unlock "$REPOS" "$USER" /path/to/mailer.conf
Index: trunk/hooks/post-lock.tmpl
===================================================================
--- trunk/hooks/post-lock.tmpl	(revision 23)
+++ trunk/hooks/post-lock.tmpl	(nonexistent)
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# POST-LOCK HOOK
-#
-# The post-lock hook is run after a path is locked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-lock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who created the lock)
-#
-# The paths that were just locked are passed to the hook via STDIN (As
-# of Subversion 1.2, only one path is passed per invocation, but the
-# plan is to pass all locked paths at once in Subversion 1.3 and
-# later).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been created and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-created lock.
-#
-# On a Unix system, the normal procedure is to have 'post-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-lock.bat' or 'post-lock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was created:
-mailer.py lock "$REPOS" "$USER" /path/to/mailer.conf
Index: trunk/hooks/pre-lock.tmpl
===================================================================
--- trunk/hooks/pre-lock.tmpl	(revision 23)
+++ trunk/hooks/pre-lock.tmpl	(nonexistent)
@@ -1,64 +0,0 @@
-#!/bin/sh
-
-# PRE-LOCK HOOK
-#
-# The pre-lock hook is invoked before an exclusive lock is
-# created.  Subversion runs this hook by invoking a program 
-# (script, executable, binary, etc.) named 'pre-lock' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] PATH         (the path in the repository about to be locked)
-#   [3] USER         (the user creating the lock)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the lock is created; but
-# if it exits with failure (non-zero), the lock action is aborted
-# and STDERR is returned to the client.
-
-# On a Unix system, the normal procedure is to have 'pre-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-lock.bat' or 'pre-lock.exe',
-# but the basic idea is the same.
-#
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-PATH="$2"
-USER="$3"
-
-# If a lock exists and is owned by a different person, don't allow it
-# to be broken.
-
-# (Maybe this script could send email to the to the lock owner?)
-SVNLOOK=/usr/local/bin/svnlook
-GREP=/bin/grep
-SED=/bin/sed
-
-LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \
-            $GREP '^Owner:' | $SED 's/Owner: //'`
-
-# If we get no result from svnlook, there's no lock, allow the lock to
-# happen:
-if [ "$LOCK_OWNER" == "" ]; then
-  exit 0
-fi
-
-# If the person locking matches the lock's owner, allow the lock to
-# happen:
-if [ "$LOCK_OWNER" == "$USER" ]; then
-  exit 0
-fi
-
-# Otherwise, we've got an owner mismatch, so return failure:
-echo "Error: $PATH already locked by ${LOCK_OWNER}." 1>&2
-exit 1
Index: trunk/format
===================================================================
--- trunk/format	(revision 23)
+++ trunk/format	(nonexistent)
@@ -1 +0,0 @@
-3
Index: trunk/db/current
===================================================================
--- trunk/db/current	(revision 23)
+++ trunk/db/current	(nonexistent)
@@ -1 +0,0 @@
-0 1 1
Index: trunk/db/format
===================================================================
--- trunk/db/format	(revision 23)
+++ trunk/db/format	(nonexistent)
@@ -1 +0,0 @@
-1
Index: trunk/db/revprops/0
===================================================================
--- trunk/db/revprops/0	(revision 23)
+++ trunk/db/revprops/0	(nonexistent)
@@ -1,5 +0,0 @@
-K 8
-svn:date
-V 27
-2005-09-05T19:14:53.531250Z
-END
Index: trunk/db/uuid
===================================================================
--- trunk/db/uuid	(revision 23)
+++ trunk/db/uuid	(nonexistent)
@@ -1 +0,0 @@
-ecb151cf-9b94-3649-ba58-e13799703548
Index: trunk/db/fs-type
===================================================================
--- trunk/db/fs-type	(revision 23)
+++ trunk/db/fs-type	(nonexistent)
@@ -1 +0,0 @@
-fsfs
Index: trunk/db/revs/0
===================================================================
--- trunk/db/revs/0	(revision 23)
+++ trunk/db/revs/0	(nonexistent)
@@ -1,11 +0,0 @@
-PLAIN
-END
-ENDREP
-id: 0.0.r0/17
-type: dir
-count: 0
-text: 0 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e
-cpath: /
-
-
-17 107
Index: trunk/conf/passwd
===================================================================
--- trunk/conf/passwd	(revision 23)
+++ trunk/conf/passwd	(nonexistent)
@@ -1,8 +0,0 @@
-### This file is an example password file for svnserve.
-### Its format is similar to that of svnserve.conf. As shown in the
-### example below it contains one section labelled [users].
-### The name and password for each user follow, one account per line.
-
-# [users]
-# harry = harryssecret
-# sally = sallyssecret
Index: trunk/conf/svnserve.conf
===================================================================
--- trunk/conf/svnserve.conf	(revision 23)
+++ trunk/conf/svnserve.conf	(nonexistent)
@@ -1,23 +0,0 @@
-### This file controls the configuration of the svnserve daemon, if you
-### use it to allow access to this repository.  (If you only allow
-### access through http: and/or file: URLs, then this file is
-### irrelevant.)
-
-### Visit http://subversion.tigris.org/ for more information.
-
-# [general]
-### These options control access to the repository for unauthenticated
-### and authenticated users.  Valid values are "write", "read",
-### and "none".  The sample settings below are the defaults.
-# anon-access = read
-# auth-access = write
-### The password-db option controls the location of the password
-### database file.  Unless you specify a path starting with a /,
-### the file's location is relative to the conf directory.
-### Uncomment the line below to use the default password file.
-# password-db = passwd
-### This option specifies the authentication realm of the repository.
-### If two repositories have the same authentication realm, they should
-### have the same password database, and vice versa.  The default realm
-### is repository's uuid.
-# realm = My First Repository
Index: trunk/SVNRepository/locks/db.lock
===================================================================
--- trunk/SVNRepository/locks/db.lock	(revision 23)
+++ trunk/SVNRepository/locks/db.lock	(nonexistent)
@@ -1,10 +0,0 @@
-DB lock file, representing locks on the versioned filesystem.
-
-All accessors -- both readers and writers -- of the repository's
-Berkeley DB environment take out shared locks on this file, and
-each accessor removes its lock when done.  If and when the DB
-recovery procedure is run, the recovery code takes out an
-exclusive lock on this file, so we can be sure no one else is
-using the DB during the recovery.
-
-You should never have to edit or remove this file.
Index: trunk/SVNRepository/locks/db-logs.lock
===================================================================
--- trunk/SVNRepository/locks/db-logs.lock	(revision 23)
+++ trunk/SVNRepository/locks/db-logs.lock	(nonexistent)
@@ -1,7 +0,0 @@
-DB logs lock file, representing locks on the versioned filesystem logs.
-
-All log manipulators of the repository's
-Berkeley DB environment take out exclusive locks on this file
-to ensure that only one accessor manupulates the logs at the time.
-
-You should never have to edit or remove this file.
Index: trunk/SVNRepository/README.txt
===================================================================
--- trunk/SVNRepository/README.txt	(revision 23)
+++ trunk/SVNRepository/README.txt	(nonexistent)
@@ -1,9 +0,0 @@
-This is a Subversion repository; use the 'svnadmin' tool to examine
-it.  Do not add, delete, or modify files here unless you know how
-to avoid corrupting the repository.
-
-If the directory "db" contains a Berkeley DB environment,
-you may need to tweak the values in "db/DB_CONFIG" to match the
-requirements of your site.
-
-Visit http://subversion.tigris.org/ for more information.
Index: trunk/SVNRepository/hooks/post-commit.tmpl
===================================================================
--- trunk/SVNRepository/hooks/post-commit.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/post-commit.tmpl	(nonexistent)
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-# POST-COMMIT HOOK
-#
-# The post-commit hook is invoked after a commit.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-commit' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the number of the revision just committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the commit has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-committed tree.
-#
-# On a Unix system, the normal procedure is to have 'post-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-commit.bat' or 'post-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-
-commit-email.pl "$REPOS" "$REV" commit-watchers@example.org
-log-commit.py --repository "$REPOS" --revision "$REV"
Index: trunk/SVNRepository/hooks/pre-unlock.tmpl
===================================================================
--- trunk/SVNRepository/hooks/pre-unlock.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/pre-unlock.tmpl	(nonexistent)
@@ -1,60 +0,0 @@
-#!/bin/sh
-
-# PRE-UNLOCK HOOK
-#
-# The pre-unlock hook is invoked before an exclusive lock is
-# destroyed.  Subversion runs this hook by invoking a program 
-# (script, executable, binary, etc.) named 'pre-unlock' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] PATH         (the path in the repository about to be unlocked)
-#   [3] USER         (the user destroying the lock)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the lock is destroyed; but
-# if it exits with failure (non-zero), the unlock action is aborted
-# and STDERR is returned to the client.
-
-# On a Unix system, the normal procedure is to have 'pre-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-unlock.bat' or 'pre-unlock.exe',
-# but the basic idea is the same.
-#
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-PATH="$2"
-USER="$3"
-
-# If a lock is owned by a different person, don't allow it be broken.
-# (Maybe this script could send email to the to the lock owner?)
-
-SVNLOOK=/usr/local/bin/svnlook
-GREP=/bin/grep
-SED=/bin/sed
-
-LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \
-            $GREP '^Owner: ' | $SED 's/Owner: //'`
-
-# If we get no result from svnlook, there's no lock, return success:
-if [ "$LOCK_OWNER" == "" ]; then
-  exit 0
-fi
-# If the person unlocking matches the lock's owner, return success:
-if [ "$LOCK_OWNER" == "$USER" ]; then
-  exit 0
-fi
-
-# Otherwise, we've got an owner mismatch, so return failure:
-echo "Error: $PATH locked by ${LOCK_OWNER}." 1>&2
-exit 1
Index: trunk/SVNRepository/hooks/pre-revprop-change.tmpl
===================================================================
--- trunk/SVNRepository/hooks/pre-revprop-change.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/pre-revprop-change.tmpl	(nonexistent)
@@ -1,65 +0,0 @@
-#!/bin/sh
-
-# PRE-REVPROP-CHANGE HOOK
-#
-# The pre-revprop-change hook is invoked before a revision property
-# is added, modified or deleted.  Subversion runs this hook by invoking
-# a program (script, executable, binary, etc.) named 'pre-revprop-change'
-# (for which this file is a template), with the following ordered
-# arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REVISION     (the revision being tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property being set on the revision)
-#   [5] ACTION       (the property is being 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the new property value is passed via STDIN.
-#
-# If the hook program exits with success, the propchange happens; but
-# if it exits with failure (non-zero), the propchange doesn't happen.
-# The hook program can use the 'svnlook' utility to examine the 
-# existing value of the revision property.
-#
-# WARNING: unlike other hooks, this hook MUST exist for revision
-# properties to be changed.  If the hook does not exist, Subversion 
-# will behave as if the hook were present, but failed.  The reason
-# for this is that revision properties are UNVERSIONED, meaning that
-# a successful propchange is destructive;  the old value is gone
-# forever.  We recommend the hook back up the old value somewhere.
-#
-# On a Unix system, the normal procedure is to have 'pre-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-revprop-change.bat' or 'pre-revprop-change.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-if [ "$ACTION" = "M" -a "$PROPNAME" = "svn:log" ]; then exit 0; fi
-
-echo "Changing revision properties other than svn:log is prohibited" >&2
-exit 1
Index: trunk/SVNRepository/hooks/pre-commit.tmpl
===================================================================
--- trunk/SVNRepository/hooks/pre-commit.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/pre-commit.tmpl	(nonexistent)
@@ -1,69 +0,0 @@
-#!/bin/sh
-
-# PRE-COMMIT HOOK
-#
-# The pre-commit hook is invoked before a Subversion txn is
-# committed.  Subversion runs this hook by invoking a program
-# (script, executable, binary, etc.) named 'pre-commit' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] TXN-NAME     (the name of the txn about to be committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the txn is committed; but
-# if it exits with failure (non-zero), the txn is aborted, no commit
-# takes place, and STDERR is returned to the client.   The hook
-# program can use the 'svnlook' utility to help it examine the txn.
-#
-# On a Unix system, the normal procedure is to have 'pre-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-#   ***  NOTE: THE HOOK PROGRAM MUST NOT MODIFY THE TXN, EXCEPT  ***
-#   ***  FOR REVISION PROPERTIES (like svn:log or svn:author).   ***
-#
-#   This is why we recommend using the read-only 'svnlook' utility.
-#   In the future, Subversion may enforce the rule that pre-commit
-#   hooks should not modify the versioned data in txns, or else come
-#   up with a mechanism to make it safe to do so (by informing the
-#   committing client of the changes).  However, right now neither
-#   mechanism is implemented, so hook writers just have to be careful.
-#
-# Note that 'pre-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-commit.bat' or 'pre-commit.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-TXN="$2"
-
-# Make sure that the log message contains some text.
-SVNLOOK=/usr/local/bin/svnlook
-$SVNLOOK log -t "$TXN" "$REPOS" | \
-   grep "[a-zA-Z0-9]" > /dev/null || exit 1
-
-# Check that the author of this commit has the rights to perform
-# the commit on the files and directories being modified.
-commit-access-control.pl "$REPOS" "$TXN" commit-access-control.cfg || exit 1
-
-# All checks passed, so allow the commit.
-exit 0
Index: trunk/SVNRepository/hooks/start-commit.tmpl
===================================================================
--- trunk/SVNRepository/hooks/start-commit.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/start-commit.tmpl	(nonexistent)
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-# START-COMMIT HOOK
-#
-# The start-commit hook is invoked before a Subversion txn is created
-# in the process of doing a commit.  Subversion runs this hook
-# by invoking a program (script, executable, binary, etc.) named
-# 'start-commit' (for which this file is a template)
-# with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the authenticated user attempting to commit)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the commit continues; but
-# if it exits with failure (non-zero), the commit is stopped before
-# a Subversion txn is created, and STDERR is returned to the client.
-#
-# On a Unix system, the normal procedure is to have 'start-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'start-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'start-commit.bat' or 'start-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-USER="$2"
-
-commit-allower.pl --repository "$REPOS" --user "$USER" || exit 1
-special-auth-check.py --user "$USER" --auth-level 3 || exit 1
-
-# All checks passed, so allow the commit.
-exit 0
Index: trunk/SVNRepository/hooks/post-revprop-change.tmpl
===================================================================
--- trunk/SVNRepository/hooks/post-revprop-change.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/post-revprop-change.tmpl	(nonexistent)
@@ -1,55 +0,0 @@
-#!/bin/sh
-
-# POST-REVPROP-CHANGE HOOK
-#
-# The post-revprop-change hook is invoked after a revision property
-# has been added, modified or deleted.  Subversion runs this hook by
-# invoking a program (script, executable, binary, etc.) named
-# 'post-revprop-change' (for which this file is a template), with the
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the revision that was tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property that was changed)
-#   [5] ACTION       (the property was 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the old property value is passed via STDIN.
-#
-# Because the propchange has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# new property value.
-#
-# On a Unix system, the normal procedure is to have 'post-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-revprop-change.bat' or 'post-revprop-change.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-propchange-email.pl "$REPOS" "$REV" "$USER" "$PROPNAME" watchers@example.org
Index: trunk/SVNRepository/hooks/post-unlock.tmpl
===================================================================
--- trunk/SVNRepository/hooks/post-unlock.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/post-unlock.tmpl	(nonexistent)
@@ -1,42 +0,0 @@
-#!/bin/sh
-
-# POST-UNLOCK HOOK
-#
-# The post-unlock hook runs after a path is unlocked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-unlock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who destroyed the lock)
-#
-# The paths that were just unlocked are passed to the hook via STDIN
-# (As of Subversion 1.2, only one path is passed per invocation, but
-# the plan is to pass all locked paths at once in Subversion 1.3 and
-# later).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been destroyed and cannot be undone,
-# the exit code of the hook program is ignored.
-#
-# On a Unix system, the normal procedure is to have 'post-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-unlock.bat' or 'post-unlock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was removed:
-mailer.py unlock "$REPOS" "$USER" /path/to/mailer.conf
Index: trunk/SVNRepository/hooks/post-lock.tmpl
===================================================================
--- trunk/SVNRepository/hooks/post-lock.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/post-lock.tmpl	(nonexistent)
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# POST-LOCK HOOK
-#
-# The post-lock hook is run after a path is locked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-lock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who created the lock)
-#
-# The paths that were just locked are passed to the hook via STDIN (As
-# of Subversion 1.2, only one path is passed per invocation, but the
-# plan is to pass all locked paths at once in Subversion 1.3 and
-# later).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been created and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-created lock.
-#
-# On a Unix system, the normal procedure is to have 'post-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-lock.bat' or 'post-lock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was created:
-mailer.py lock "$REPOS" "$USER" /path/to/mailer.conf
Index: trunk/SVNRepository/hooks/pre-lock.tmpl
===================================================================
--- trunk/SVNRepository/hooks/pre-lock.tmpl	(revision 23)
+++ trunk/SVNRepository/hooks/pre-lock.tmpl	(nonexistent)
@@ -1,64 +0,0 @@
-#!/bin/sh
-
-# PRE-LOCK HOOK
-#
-# The pre-lock hook is invoked before an exclusive lock is
-# created.  Subversion runs this hook by invoking a program 
-# (script, executable, binary, etc.) named 'pre-lock' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] PATH         (the path in the repository about to be locked)
-#   [3] USER         (the user creating the lock)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the lock is created; but
-# if it exits with failure (non-zero), the lock action is aborted
-# and STDERR is returned to the client.
-
-# On a Unix system, the normal procedure is to have 'pre-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'pre-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-lock.bat' or 'pre-lock.exe',
-# but the basic idea is the same.
-#
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-PATH="$2"
-USER="$3"
-
-# If a lock exists and is owned by a different person, don't allow it
-# to be broken.
-
-# (Maybe this script could send email to the to the lock owner?)
-SVNLOOK=/usr/local/bin/svnlook
-GREP=/bin/grep
-SED=/bin/sed
-
-LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \
-            $GREP '^Owner:' | $SED 's/Owner: //'`
-
-# If we get no result from svnlook, there's no lock, allow the lock to
-# happen:
-if [ "$LOCK_OWNER" == "" ]; then
-  exit 0
-fi
-
-# If the person locking matches the lock's owner, allow the lock to
-# happen:
-if [ "$LOCK_OWNER" == "$USER" ]; then
-  exit 0
-fi
-
-# Otherwise, we've got an owner mismatch, so return failure:
-echo "Error: $PATH already locked by ${LOCK_OWNER}." 1>&2
-exit 1
Index: trunk/SVNRepository/format
===================================================================
--- trunk/SVNRepository/format	(revision 23)
+++ trunk/SVNRepository/format	(nonexistent)
@@ -1 +0,0 @@
-3
Index: trunk/SVNRepository/db/current
===================================================================
--- trunk/SVNRepository/db/current	(revision 23)
+++ trunk/SVNRepository/db/current	(nonexistent)
@@ -1 +0,0 @@
-0 1 1
Index: trunk/SVNRepository/db/format
===================================================================
--- trunk/SVNRepository/db/format	(revision 23)
+++ trunk/SVNRepository/db/format	(nonexistent)
@@ -1 +0,0 @@
-1
Index: trunk/SVNRepository/db/revprops/0
===================================================================
--- trunk/SVNRepository/db/revprops/0	(revision 23)
+++ trunk/SVNRepository/db/revprops/0	(nonexistent)
@@ -1,5 +0,0 @@
-K 8
-svn:date
-V 27
-2005-09-05T19:19:23.203125Z
-END
Index: trunk/SVNRepository/db/uuid
===================================================================
--- trunk/SVNRepository/db/uuid	(revision 23)
+++ trunk/SVNRepository/db/uuid	(nonexistent)
@@ -1 +0,0 @@
-6b03b328-9bc6-3d48-be0f-2860eb8a9d3d
Index: trunk/SVNRepository/db/fs-type
===================================================================
--- trunk/SVNRepository/db/fs-type	(revision 23)
+++ trunk/SVNRepository/db/fs-type	(nonexistent)
@@ -1 +0,0 @@
-fsfs
Index: trunk/SVNRepository/db/revs/0
===================================================================
--- trunk/SVNRepository/db/revs/0	(revision 23)
+++ trunk/SVNRepository/db/revs/0	(nonexistent)
@@ -1,11 +0,0 @@
-PLAIN
-END
-ENDREP
-id: 0.0.r0/17
-type: dir
-count: 0
-text: 0 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e
-cpath: /
-
-
-17 107
Index: trunk/SVNRepository/conf/passwd
===================================================================
--- trunk/SVNRepository/conf/passwd	(revision 23)
+++ trunk/SVNRepository/conf/passwd	(nonexistent)
@@ -1,8 +0,0 @@
-### This file is an example password file for svnserve.
-### Its format is similar to that of svnserve.conf. As shown in the
-### example below it contains one section labelled [users].
-### The name and password for each user follow, one account per line.
-
-# [users]
-# harry = harryssecret
-# sally = sallyssecret
Index: trunk/SVNRepository/conf/svnserve.conf
===================================================================
--- trunk/SVNRepository/conf/svnserve.conf	(revision 23)
+++ trunk/SVNRepository/conf/svnserve.conf	(nonexistent)
@@ -1,23 +0,0 @@
-### This file controls the configuration of the svnserve daemon, if you
-### use it to allow access to this repository.  (If you only allow
-### access through http: and/or file: URLs, then this file is
-### irrelevant.)
-
-### Visit http://subversion.tigris.org/ for more information.
-
-# [general]
-### These options control access to the repository for unauthenticated
-### and authenticated users.  Valid values are "write", "read",
-### and "none".  The sample settings below are the defaults.
-# anon-access = read
-# auth-access = write
-### The password-db option controls the location of the password
-### database file.  Unless you specify a path starting with a /,
-### the file's location is relative to the conf directory.
-### Uncomment the line below to use the default password file.
-# password-db = passwd
-### This option specifies the authentication realm of the repository.
-### If two repositories have the same authentication realm, they should
-### have the same password database, and vice versa.  The default realm
-### is repository's uuid.
-# realm = My First Repository
Index: trunk/wb/languages/EN.php
===================================================================
--- trunk/wb/languages/EN.php	(revision 23)
+++ trunk/wb/languages/EN.php	(revision 24)
@@ -425,7 +425,6 @@
 $MESSAGE['GROUPS']['GROUP_NAME_BLANK'] = 'Group name is blank';
 $MESSAGE['GROUPS']['CONFIRM_DELETE'] = 'Are you sure you want to delete the selected group (and any users that belong to it)?';
 $MESSAGE['GROUPS']['NO_GROUPS_FOUND'] = 'No groups found';
-$MESSAGE['GROUPS']['GROUP_NAME_EXISTS'] = 'Group name already exists';
 
 $MESSAGE['PREFERENCES']['DETAILS_SAVED'] = 'Details saved successfully';
 $MESSAGE['PREFERENCES']['EMAIL_UPDATED'] = 'Email updated successfully';
Index: trunk/wb/admin/groups/add.php
===================================================================
--- trunk/wb/admin/groups/add.php	(revision 23)
+++ trunk/wb/admin/groups/add.php	(revision 24)
@@ -41,10 +41,6 @@
 if($group_name == "") {
 	$admin->print_error($MESSAGE['GROUPS']['GROUP_NAME_BLANK'], $js_back);
 }
-$results = $database->query("SELECT * FROM ".TABLE_PREFIX."groups WHERE name = '$group_name'");
-if($results->numRows()>0) {
-	$admin->print_error($MESSAGE['GROUPS']['GROUP_NAME_EXISTS'], $js_back);
-}
 
 // Get system and module permissions
 require(ADMIN_PATH.'/groups/get_permissions.php');